EN
Sign In Get Started
Get Started Sign In

Benelli ECU
Flashing

Flash the Bosch ECU in your Benelli TRK 502, TRK 702, Leoncino 500, 502C or Panarea 125 through the diagnostic connector.

6Models
6Model years
2ECU families
Find your Benelli See pricing
Supported models

Every Benelli we can flash

Model years, the ECU inside and the interface it needs. Bench wiring diagrams for every model are in your MotoFlasher account.

Model Years ECU Interface
PANAREA 125 2022+ Bosch MSE8.0 1.5 MB Tactrix OpenPort 2.0CANable
502C 2019–2020 Bosch MSE6.0 1.5 MB Tactrix OpenPort 2.0CANable
LEONCINO 500 2017–2020 Bosch MSE6.0 1.5 MB Tactrix OpenPort 2.0CANable
TRK 502 2017–2022 Bosch MSE6.0 1.5 MB Tactrix OpenPort 2.0CANable
TRK 552 2024–2024 Bosch MSE6.0 1.5 MB Tactrix OpenPort 2.0CANable
TRK 702 2023–2025 Bosch MSE6.0 1.5 MB Tactrix OpenPort 2.0CANable
Inside the bike

Benelli ECU families

Which engine computer each model uses decides how it is read and written. MotoFlasher picks the right protocol for you.

Bosch Included

MSE6.0

1.5 MB

502C, LEONCINO 500, TRK 502, TRK 552, TRK 702

Tactrix OpenPort 2.0CANable
Bosch Included

MSE8.0

1.5 MB

PANAREA 125

Tactrix OpenPort 2.0CANable
How it works

Flash your Benelli in four steps

  1. 01

    Connect

    Plug your interface into the diagnostic port, or wire the ECU on the bench with the diagram from your account.

  2. 02

    Read & back up

    MotoFlasher identifies the ECU and reads the full flash. Keep that original file: it is your way back.

  3. 03

    Tune

    Edit fuel, ignition, limiters and the other maps in your tuning editor, or load a file from your tuner.

  4. 04

    Write

    MotoFlasher corrects the checksum and writes the file back. Start the bike and ride.

Why flash a Benelli ECU?

The TRK 502 is one of the best-selling adventure bikes in Europe, and like the rest of the Benelli range it runs a conservative Bosch calibration: lean at small throttle openings, with a soft response. A reflash smooths the pick-up, matches the fuelling to an exhaust and sets the bike up for the way you ride.

Benelli ECU families

  • Bosch MSE6.0: the TRK 502, TRK 552, TRK 702, Leoncino 500 and 502C.
  • Bosch MSE8.0: the Panarea 125.

Flashing a Benelli, step by step

  1. Keep the battery on a charger.
  2. Connect a Tactrix OpenPort 2.0 or CANable to the diagnostic connector.
  3. Read the ECU and save the original file.
  4. Edit the maps or load the file from your tuner.
  5. Write it back. MotoFlasher corrects the checksum.

Frequently asked questions

Is the Benelli TRK 502 supported?

Yes, on the Bosch MSE6.0 ECU, along with the TRK 552 and TRK 702.

Which interface do I need for a Benelli?

A Tactrix OpenPort 2.0 or a CANable.

Can I go back to the stock map?

Yes. MotoFlasher reads the full original file before writing anything, and you can write it back at any time.

More brands

Flashing another brand?

Aprilia 12 models BMW 3 models CFMoto 47 models Ducati 12 models GOES 7 models Honda 19 models Italjet 1 model Kawasaki 33 models Kove 13 models KTM 7 models Loncin 2 models Moto Guzzi 5 models Moto Morini 3 models ODES 1 model Piaggio 4 models QJ Motor 9 models Segway 5 models Suzuki 17 models Triumph 14 models Voge 20 models Yamaha 17 models Zontes 17 models ZX Moto 1 model

Ready to flash your Benelli?

One license, every supported model of the brand, free software updates and support from people who tune bikes.

Get Started Ask a question