KTM ECU
Flash

Why flash a KTM ECU?

KTM’s big twins are among the most powerful road bikes made, and their factory calibration still holds them back: lean low-throttle fuelling that makes the throttle abrupt in town, torque limits in the lower gears and maps built around noise tests. A reflash lets you tune fuel, ignition and throttle for your exhaust, your fuel and the way you ride, on the road or on track.

KTM ECU families

• Keihin SH72531 (KTM CAN): the 1090 and 1190 Adventure, early 1290 Super Adventure, 1290 Super Duke and Super Duke GT, plus the older 690 SMC.
• Keihin RH850 (KTM CAN, 2020+): the 2020 to 2023 1290 Super Duke, Super Duke GT and Super Adventure, and the current 690 SMC.
• Keihin RH850 (KTM CAN, 2024+): the 1390 Super Duke.

All of them are read and written through the diagnostic connector, with no need to remove the ECU. Add-on ECU families are marked in the table above.

What riders change on a KTM

• Smoother part-throttle fuelling and less snatch at low speed.
• Low-gear torque limits.
• Fuel and ignition after an exhaust change.
• Rev limiter and fan temperature.
• Track and supermoto settings on the 690 SMC.

Flashing a KTM, step by step

1. Keep the battery on a charger.
2. Connect a Tactrix OpenPort 2.0 or CANable to the diagnostic connector.
3. Read the ECU and save the original file.
4. Edit the maps or load the file from your tuner.
5. Write it back. MotoFlasher corrects the checksum.

Frequently asked questions